ElectroSmog Meter
| Place of Origin: |
Beijing, China (Mainland) |
Product Detail
ElectroSmog Meter
1.10 MHz to 8.0 GHz frequency range.
2.For isotropic measurements of electromagnetic fields.
| | ElectroSmog Meter | EMF Meter/ ElectroSmog Meter | | | | - 10 MHz to 8.0 GHz frequency range.
- For isotropic measurements of electromagnetic fields.
- Non-directional (isotropic ) measurement with three-channel measurement probe.
- High dynamic range due to three-channel digital results processing.
- Configurable alarm threshold and memory function.
- Easy to use
| | | - High frequency (RF) electromagnetic wave field strength measurement.
- Mobil phone base station antenna radiation power density measurement.
- Wireless communication applications (CW , TDMA , GSM , DECT).
| - Wireless LAN (Wi-Fi) detection, installation.
- Spy camera, wireless bug finder.
- Cellular/Cordless phone radiation safety level.
- Microwave oven leakage detection.
- Personal living environment EMF safety.
- RF power measurement for transmitters.
|
| | | ELECTRICAL SPECIFICATIONS |
| Sensor type | Electric field (E) | | Frequency range | 10MHz to 8.0 GHz | | Directional characteristic | Isotropic, 3-dimensional | | Measurement range (CW signal>50MHz) | 38mV/m to 11V/m | | Absolute error(@1V/m and 50MHz) | ± 1.0dB | | Frequency response (taking into account typ. CAL factor) | ± 1.0dB (50MHz to 1.9 GHz) , ±2.4dB(1.9GHz to 35GHz) | | Isotropy deviation | Type. ±1.0dB f>50 MHz | | Overload limit | 4.2W/m2 (40 V/m) | | Temperature response(0 to 50 ) | ± 1.5dB | | Note | Unless otherwise stated, all specifications hold under the following assumptions: Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23 ±3 ;relative air humidity 25% to 75%. |
| | Measurement method | Digital , triaxial measurement | | Directional characteristic | Isotropic, triaxial | | Measurement range selection | One continuous range | | Display resolution | 0.1mV/m, 0.1 μA/m, 0.1 μW/m², 0.001 μW/cm² | | Setting time | Typically 1s ( 0 to 90% of meas. value) | | Display refresh rate | Typically 400mS | | Display type | LCD 4 digit | | Audible alarm | Buzzer | | Measurement units | mV/m , V/m , μA/m , mA/m , μW/m² , mW/m² , μW/cm² | | Measurement display value | Instantaneous measured value, maximum value or average value since power-on. | | Measurement average time (in per-set steps) | 4s to 15 minutes | | Measurement alarm function | Adjustable threshold with ON/OFF | | Measurement calibration factor CAL | Adjustable | | Manual data memory and read storage | 99 sets ( only recall by meter ) | | Battery | 9V | | Battery life | >15 hours | | Accessory | 9V battery, carrying case & manual |
|
|
|
|---|
Related Search
Find more related products in following catalogs on Hisupplier.com
